A Cost Effective Bait Tank That Works.

Striper soup 26 gallon shad tank with filtration, circulation,and oxygenation. Very affective setup at a great price. http://stripersoup.com/wpress/bait-tanks/#!/Striper-Soup-Moeller-M-26F/p/41253126/category=6630113 Get your monster rod holders here https://monsterrodholders.com/. #baittank #catfishbait #stripersoup

50 Comments

  1. richard rothanburg on November 11, 2020 at 1:48 am

    I like the design not so much on the price. I would guess there are lots of fishermen with cheaper ways. Love your show, stay safe and keep the kids learning

  2. Patrick Holland on November 11, 2020 at 1:50 am

    Does it filter just by water volume in the tank

  3. ghut 1973 on November 11, 2020 at 1:50 am

    $450 is not cheap…

  4. Catfish and Crappie on November 11, 2020 at 1:50 am

    Great video! I also learned something! Never knew about the ammonia deal with shad. Happy Fishing!

  5. Tennessee Flipper on November 11, 2020 at 1:52 am

    At $400…calling that thing "affordable" is a stretch lol

  6. Patrick McNew on November 11, 2020 at 1:57 am

    Great review. Great bait tank.

  7. M.A.T on November 11, 2020 at 1:58 am

    I plan to use mine in sea water for mackerel even menhaden. is there a way to eliminate the top water scum?

  8. wish2fish on November 11, 2020 at 1:58 am

    Nice review…I built a homemade version(uploaded a video on it recently) with the Danco aerator and bilge.Got idea here on YouTube.One issue I found was heat generated by pump made the water get too warm.Minnows and shiners more apt to die from the warm water.I also adapted mine to run with a 110/12 volt inverter so I would not have to run it off my Marine battery.You may want to look into that.Pump was overkill for the small barrel I used.

  9. Jerrica Bryant on November 11, 2020 at 1:59 am

    I seen the drain hole at the bottom but wouldnt it be hard to lift the tank after it’s full to empty.

  10. Fins and Finds on November 11, 2020 at 1:59 am

    Great video. The builder of that tank probably knows more about bait tanks and keeping shad alive than anyone on the world. Rest assured that you bought the best tank available in that price range.

  11. William Cook on November 11, 2020 at 1:59 am

    Appreciate the fact that you showed full aspect of the bait tank especially coming from own money. Definitely a product I be buying in future.

  12. John Waldon on November 11, 2020 at 2:00 am

    Good video Hagen.

  13. Robbie Smith on November 11, 2020 at 2:01 am

    Will it keep moon eye alive

  14. Tom Waskom on November 11, 2020 at 2:03 am

    Thanks for good un-biases review.Hagen

  15. Paul E on November 11, 2020 at 2:03 am

    Can you tell me the dimensions of the tank?

  16. Gary Borders on November 11, 2020 at 2:04 am

    How Far Is The False Bottom From The Bottom Of The Tank?

  17. mark Willis on November 11, 2020 at 2:05 am

    very nice we just have trouble locateing any shad down here on the green river anymore used to be everywhere now hard to find idk.

  18. Steve Duncan on November 11, 2020 at 2:06 am

    Way cool man thanks I’m going to look into one

  19. Doug Smith on November 11, 2020 at 2:07 am

    Want one and don’t have a boat (yet) . Thanks for the video.

  20. Lucas Payne on November 11, 2020 at 2:10 am

    I was almost finished with my little boat an decided to add the same type bait tank an a bimini top an rod rack on the back. Thanks for the video

  21. William Pope on November 11, 2020 at 2:10 am

    Very nice little tank. Looks like it’ll fit perfectly in my little Tracker Topper 1542. I’ve seen them online but never a video featuring them so I appreciate the video. And just in case this helps somebody, powdered coffee creamer works for foam too. What I do is get the little packs from gas station coffee stations and keep them in my tackle box.

  22. Brian Forrest on November 11, 2020 at 2:13 am

    Pretty cool video but when u gonna go back to fishing

  23. Randy Wilson on November 11, 2020 at 2:15 am

    Man ole kayak catfish is rippen lips on cut bait (flathead) u better get out in the water. Haven seen the box that upload your bait(fish) and close the lid and just cut bait? They’re all the same size. It was cool looking it has a box about a foot and half long with 6 notch’s and fill with shad and close lid and just cut in the slots

  24. jason Blackburn on November 11, 2020 at 2:17 am

    Where you live at in ky

  25. Whiskertime Fishing on November 11, 2020 at 2:18 am

    Great video man! I have the same bait tank but just the standard issue. Since I already have most of the parts laying around I think I’ll soup up mine. Looks relatively easy to build. All I need too know is what size standpipe they used?

  26. Rusty Setser on November 11, 2020 at 2:19 am

    Great video straightforward honest and informative glad you are putting out more than just casting a line and waiting. Don’t get me wrong I like seeing you guys reel in the big ones too!

  27. Bryce Stowe on November 11, 2020 at 2:21 am

    Hey can you make a video going over your favorite rod and reels

  28. Mike Greenwell. on November 11, 2020 at 2:22 am

    That’s a damn good tank man, do you find that the Flatheads still want live or cut shad right now, Compared to bluegill?

  29. Billy Dev on November 11, 2020 at 2:22 am

    450$

  30. Charles Beverly on November 11, 2020 at 2:23 am

    You guys Catfish ? Check out the group it’s Awesome group fellas

    https://www.facebook.com/groups/467557204016125/?ref=share

  31. Waters Lawn Care on November 11, 2020 at 2:24 am

    I have a rod holder setup similar to yours and was wondering how you installed the bait board ? To pop on and off the rack . And what did you use . Thanks!

  32. Big K Outdoors on November 11, 2020 at 2:27 am

    Now I want one too. Sounds like it does an outstanding job!

  33. 2010S197 on November 11, 2020 at 2:28 am

    Im thinking someone could go buy themselves one of those ice chests with 2 half lids, get a dannco venturi, get yourself a bilge pump, some pvc and little ingenuity cut you a hole through one of the lids and build something like seen here. And it would be insulated. Walmart has an 18 gallon with the dual lids for 58 bucks, the venturi for 30 buck, your choice of bilge pumps from 20-60 bucks id guess then getting some pvc which im not sure of the price but what you’d need to build that would be pretty cheap but im pretty sure you could do one up for under half the cost of the one in the video. The one in the video is pretty nice though, I hadn’t ever priced them so I when he said quality vs budget I still wasn’t expecting the price. Great video Hagen

  34. Bub on November 11, 2020 at 2:29 am

    Worth every penny. I fish the striper run yearly on the Hudson river and this is by far the best system that I’ve used to keep my herring alive. Excellent filtration. Even when filling up when the river is muddy it comes out clear as can be.

  35. Randy Wilson on November 11, 2020 at 2:29 am

    Did u catch any thing

  36. bobby newton on November 11, 2020 at 2:31 am

    Very informative thanks for sharing God Bless

  37. grillsbears on November 11, 2020 at 2:31 am

    thats not cost effective, bought my tank from cabelas less than 200 spent another 50 and basically ended up the same.

  38. Glenn Moses on November 11, 2020 at 2:33 am

    Really appreciate you taking the time to make these videos, I will be getting a tank just based on your video and I will be sure to let the folks know you sent me. Thanks again

  39. bowhunter 4 life on November 11, 2020 at 2:34 am

    I’m gonna diy a bait tank this week…thanks for the video gives me some ideas for mine.

  40. Chuck Smith on November 11, 2020 at 2:34 am

    It`s a nice looking tank but a little pricey for me . Here in Florida the most I fish with beside artificial is Minnows so it`s not beneficial to me . Liked the video .

  41. winn_outdoors on November 11, 2020 at 2:35 am

    Going to try and get on some this weekend the bayou state

  42. Keith Andrews on November 11, 2020 at 2:37 am

    What’s the link for this tank?

  43. Big c catfishing on November 11, 2020 at 2:37 am

    Thats awesome man little coffee creamer will kill the foam

  44. Fierceflyer55 on November 11, 2020 at 2:38 am

    WoW a bargain at only $400. 🙄

  45. Muskrat Adventures on November 11, 2020 at 2:41 am

    Sweet tank. Chris Souders has just came out with a special blend of foam off. Its good stuff! Thanks for sharing!

  46. Shad Man on November 11, 2020 at 2:42 am

    Massive video brother! The ‘small’ tank on my shad boat is 100 gallon, but I use one of these Striper Soup tanks on my little puddlejumper and it’s a badass little tank. Accept NO substitutes or bad copies!

  47. Charles Fitzgerald on November 11, 2020 at 2:44 am

    Thats badass right there , can I use that as a makeshift live well for an aluminum jon boat ? so I can try to fish a bass tournament

  48. Kyle Needham on November 11, 2020 at 2:45 am

    Insight from a fish hobbyist. Not sure how long you have had the tank if only a week or two go buy some fritz quick start from a pet store. It will get the beneficial bacteria in the filters. Try to always keep fish in the tank. If you don’t have fish throw some smaller pieces of food of sort to keep the cycle going. Lastly take 50 percent of the water out about every week and replace with fresh.

    You will keep shad for alive a lot longer! I see so many people after a trip shut the tank down which kills all the bacteria.

  49. huntemup309 on November 11, 2020 at 2:45 am

    Excellent video as always!! Thank you!!
    Does anyone have a contact number for Stiper Soup? The number in the video is disconnected or out of service.. (And I do not have Facebook).. Help would be appreciated, thanks all!!

  50. William Kunszt on November 11, 2020 at 2:46 am

    You can drop some ice packs to keep it cool

Leave a Comment